DRAIN & CURB MARKERS

• Easy to use; requiring no special tools or surface preparation.
• Durable; making costly re-marking un-necessary.
• Attractive; providing a uniform profes-sional appearance.
• Made from a .030″ proprietary white plastic with IN inhibitors and a layering of materials for flexibility and impact resistance.
• The printing is on the Face of the mate-rial which is then covered with a layer of UV clearcoating for UV and abra-sion resistance.
• A .060″ polyurethane “dome” is applied to the Face of the marker. This opti-cally clear, self-healing, non-yellow-ing Duracast surface protects against mechanical and chemical abrasion.
• The Duracast surface effectively doubles U.V. resistance as well.
• 12-Year warranty.
• It’s available in stock titles or custom manufactured to virtually any size, shape or number of colors.
• Our markers are less expensive than brass or ceramic or thermal plastic, won’t crack and crumble (ceramic), won’t bend exposing sharp edges (alu-minum), won’t tarnish (brass), and have no scrap value (brass & aluminum).
• REM offers a variety of custom printed collateral items to support your mark-ing program. Door hangers to inform the public, buttons, refrigerator door magnets, and sports bottles.

DURACAST DRAIN AND CURB MARKERS

Public education and outreach is part of the National Pollutant Discharge Elimination System (NPDES) requirement. Storm drain marking is an established method of involving the public and increasing community awareness about non-point source pollution. Unfortunately, storm drain marking using spray painted stencils is messy, time consuming, and contradictory to the environmental message being presented (it eventually washes down the “protected” drain). It’s also ultimately quite expensive as it must be re-done every couple of years. Our storm drain marker is the only performance proven alternative available.

REM- HELPING KEEP YOUR WATERWAYS CLEAN.
Revel Environmental Manufacturing, Inc.
www.remfilters.com
888-526-4736

Easy Installation

1. Clean Surface
Make sure application surface is flat, dry and free of any loose debris.
2. Apply Adhesive
Coming in 1/8″ from the outside edge of the marker, apply a bead of adhesive and then work in to the center.
3. Stick It!
Apply the marker to the application surface pushing down HARD forcing adhesive out around the entire edge. It is important that the entire edge of the marker is sealed to the application surface.